Yamaha 9000 Pro - Manual (Page 132)

Style Creator Style Creator
132 Reference
Style Recording (Full Edit)
This section explains how to record all parts by playing the keyboard.
The explanations here apply to step #5 of the Basic Procedure on page 128.
■ Basic Setting for Recording
• Section ................... Select the section you want to program.
• Pattern Length ....... Select the desired number of measures (1-32) for the selected section (except for FILL IN
sections, which are fixed at 1 measure).
• Beat ....................... Select a different time signature: 2/4, 3/4, 4/4, or 5/4. Please note that the time signature
can only be changed if all sections of the current style have been cleared. If any data
remains in any section, the alert message will appear. A new time signature can be
selected after clearing all sections of the current selected style.
• Tempo .................... Set the default tempo for the new style.
• Part Copy ............... Instead of starting with all the sections and/or parts from the selected original style, you
can copy specific parts from other sections/parts of the same style, or from other styles as
required.
Also, in some cases it may not be possible to copy from other parts. In such a case the
EXECUTE LCD button will appear in gray and will not be available.
■ Style Recording – Rhythm Tracks
Select the
desired menu.
START/STOP
You can also delete certain percussion
sounds while recording.
While holding this button, press the key on
the keyboard corresponding to the instru-
ment you want to cancel.
When this button is pressed, DELETE will
appear for parts which contain data.
Set the desired part to "DELETE" while
holding this button to delete all data in the
corresponding parts. The data is actually
deleted when this button is released.
1
Set one of Rhythm parts to "REC."
2
Press the [START/STOP] button to start recording.
• Only DRUM KIT/SFX KIT and
DRUM KIT custom voices can
be selected for the RHY2 part.
• All voices except the ORGAN
FLUTE voice can be selected
for the RHY1 part.
• You can also start recording by
pressing [SYNC START] button
and playing a key on the key-
board.
3
Press the [START/
STOP] button again to
stop recording.
The selected section of the current style will begin playing (only the metro-
nome will sound if the rhythm parts have been cleared). The style will loop
(play) continuously to allow convenient recording and overdubbing.
Since the rhythm pattern plays back repeatedly, you can record by overdub-
bing — listening to the pattern and playing the desired keys. Look at the icons
printed under the keys indicating the percussion sounds that are assigned to
each key.
130