Yamaha 9000 Pro - Manual (Page 153)

Disk/SCSI Operations Disk/SCSI Operations
Reference 153
Saving Data from Flash ROM to a Disk
The data types described below can be saved to a floppy disk, an optional hard disk, or
an optional SCSI device.
The explanations here apply to step #3 of the Basic Procedure on page 150.
● Execute the Save operation by following the on-screen instructions.
● Select the destination file in the disk.
For details on directory file
selection, see page 151.
If an optional hard disk has
been installed or an
optional SCSI device has
been connected, the
appropriate device must be
selected here.
CAUTION
• When overwriting an exist-
ing file, all data is saved. This
means that previous data
corresponding to unchecked
(OFF) items will be over-writ-
ten with “empty” data.
• Saving style data can be exe-
cuted via the Style Manager
function (page 74).
● Select the data type to be saved.
Select the
desired group of
data to be saved.
The data types
listed at right can
be set to ON or
OFF as desired.
Set the data type to ON or OFF.
Data types set to ON are saved.
SETUP All setup data — see list on
page 214.
EFFECT
DATA All User effect data — page
146.
REGISTRA-
TION BANK All Registration Memory
data — page 214.
You can set the individual
banks to ON or OFF.
MULTI PAD All Multi Pad data — page
141.
You can set the individual
banks to ON or OFF.
CUSTOM
VOICE All Custom Voice data —
page 92.
You can set the individual
numbers to ON or OFF. If
necessary, use the Wave
save option.
ORGAN
FLUTES All Organ Flutes voice set-
tings — page 62.
You can set the individual
numbers to ON or OFF.
NEXT BACK
PAGE CONTROL
NEXT BACK
PAGE CONTROL
151