Zoom modeling amp FIRE-15 - Manual (Page 14)

Using the FIRE-15
14 ZOOM FIRE-15
4.
While the reference pitch is shown, you can use the [
Q]/[ W ] keys to change the setting.
The setting range is 35 - 45 (center A = 435 Hz - 445 Hz).
N OTE
When power is turned off and on again, the reference pitch is reset to "40" (center A = 440 Hz).
5.
When tuning is complete, press the [TUNER] key to turn the tuner off.
The tuner function is disabled.
N OTE
During use of the tuner, effects are turned off.
Switching the mode with the foot switch
Using the separately available foot switch, you can toggle between manual mode and program
mode during play.
1.
Turn off power to the FIRE-15 and connect the foot switch FS-01 (available separately)
to the [FOOT SW] jack.
N OTE
Please do not connect or disconnect the foot switch while power is turned on.
2.
Turn power to the FIRE-15 on.
The FIRE-15 is in manual mode.
3.
Press the foot switch while you are playing your instrument.
When you push the foot switch, the FIRE-15 switches to program mode, and the currently
selected patch becomes active. If required, use the [PROGRAM/BANK] key and [
Q
]/[
W
] keys to
4 0
4 2
- -
Display in manual mode