Zoom modeling amp FIRE-15 - Manual (Page 8)

Connections
8 ZOOM FIRE-15
Guitar
FS01
606 or similar effect pedal
CD player or similar
Power Cord
Headphones
MRS-1266 or similar recording device
When connecting a multi-effect
device (such as the ZOOM 606
or 707II) between the guitar and
the FIRE-15, set the [DRIVE
TYPE] knob to "EFFECT IN".
To input the signal from a CD player or
other stereo playback device, use a stereo
cable and connect it to the [AUX IN] jack.
The signal input here is mixed internally
with the guitar signal.
To monitor the output of the
FIRE-15 with headphones,
connect the headphone plug to the
[RECORDING/PHONES] jack.
(When a plug is inserted in this
jack, the speaker output is
automatically turned off.)
To record the output of the FIRE-15,
connect the recording device such
as the ZOOM MRS-1266 to the
[RECORDING/PHONES] jack.
To toggle between manual
mode and program mode
with your foot, connect
the separately available
foot switch ZOOM FS-01
here.
Connections