Zoom modeling amp FIRE-15 - Manual (Page 3)

USAGE AND SAFETY PRECAUTIONS
3 ZOOM FIRE-15
• Volume
Do not use the FIRE-15at a loud volume for a long time since this can cause hearing impairment.
• Connecting cables and input and output jacks
You should always turn off the power to the FIRE-15 and all other equipment before connecting
or disconnecting any cables. Also make sure to disconnect all connection cables and the power
cord before moving the FIRE-15.
Usage Precautions
• Electrical interference
For safety considerations, the FIRE-15 has been designed to provide maximum protection against the
emission of electromagnetic radiation from inside the device, and protection from external interference.
However, equipment that is very susceptible to interference or that emits powerful electromagnetic
waves should not be placed near the FIRE-15, as the possibility of interference cannot be ruled out
entirely.
With any type of digital control device, the FIRE-15 included, electromagnetic interference can cause
malfunctioning and can corrupt or destroy data. Care should be taken to minimize the risk of damage.
• Cleaning
Use a soft, dry cloth to clean the FIRE-15. If necessary, slightly moisten the cloth. Do not use abrasive
cleanser, wax, or solvents (such as paint thinner or cleaning alcohol), since these may dull the finish or
damage the surface.
Please keep this manual in a convenient place for future reference.
© ZOOM Corporation
Reproduction of this manual, in whole or in part, by any means, is prohibited.
Caution
Caution