Yamaha MC802 - Manual (Page 10)

VU Meters and METER Assign Switches (AUX1/AUX2/AUX3/CUE)
The MC-series mixing console feature three VU meters with built-in LED peak indicators for
monitoring signal levels. The rightmost meter pair (L ST R) continuously monitors signals
on the main stereo program buss. The AUX/CUE meter can be switched to monitor signals on
the AUX 1, AUX 2, AUX 3 or CUE busses by pressing the corresponding METER assign
switch.
CUE/PHONES Control and PHONES Jack
The CUE/PHONES control adjusts the level of the cue signal sent to the PHONES jack so you
can set the most confortable headphone monitoring level. The stereo phone jack accepts any
standard stereo headphones.
* The STEREO cue signal appears in stereo at the phones jack, while the channel and AUX
cue signals are monaural.
STEREO CUE Switch
Turning this switch ON sends the main stereo program buss signal, in stereo, to the stereo
PHONES jack via the CUE/PHONES control. The STEREO CUE switch can normally be turned
ON to permit headphone monitoring of the main stereo program, but it must be turned OFF
to individually monitor input channel or AUX buss cue signals.
8