Zanussi ZBM 799 - Manual (Page 7)

27
Before Use
Before using this appliance, carefully remo-
ve all protective film from stainless steel or
anodised aluminium parts. All packaging
must be removed from inside and outside the
appliance before use.
Before using the oven for the first time, the
oven should be heated without food. Set the
cooking selector dial to conventional oven,
set the thermostat dial to MAX and leave for
45 minutes. Then turn the selector dial to fan
oven and leave for 5 minutes. Repeat with
the grill function. During this operation, an
unpleasant odour may be emitted, it is the-
refore advisable to open a window for venti-
lation.
Oven Safety Features
Orange Pilot Light
The pilot light indicates that the appliance is
switched on, and will illuminate for all
cooking methods.
Red Thermostat Light
This thermostat light will illuminate whilst
the oven is heating to set temperature, it will
then cycle on and off indicating that tempe-
rature is being maintained.
Grilling Safety Device
The oven is equipped with a safety device
which interrupts the electrical supply to the
grill element to prevent overheating. The
grill/rotisserie will resume when the tempe-
rature has lowered.
In case of component defect, contact your
local service centre.
Cooling Fan
The cooling fan cools the control panel, the
control knobs and the internal components of
the oven.
The cooling fan starts automatically when
using the oven.
Your Appliance
Control panel
1. Orange pilot light
2. Red thermostat light
3. Thermostat selector
4. Cooking selector
5. Electronic display
Instructions for the User
Stop
max
250
200 150
100
50
0
0
1 3 2 4 5
150 Rev 1del 06 /03 Rex 12-06-2003 15:15 Pagina 27