Yamaha RX-V995 - Manual (Page 57)

53
English
Ⅵ
Program No. 6 to 10: CINEMA-DSP programs (for Audio/Video sources)
● These programs use the Dolby Pro Logic decoder, the Dolby Digital decoder or the DTS decoder.
● Speaker output: main, center, rear
Note: If the “NONE” position is selected on “1. CENTER SPEAKER” in the SET MENU mode, no sound is output from
the center speaker(s).
● For program No. 6 and 7 only, indicators light up as follows.
When the input signal is analog or PCM audio: ( )
When the input signal is encoded with the Dolby Digital (not in 2 channels): ( )
When the input signal is encoded with the DTS: ( )
DSP
DSP DIGITAL
DSP
BASIC OPERATION
FEATURE
This program is furnished with a tight sound field in which the
sound will not spread excessively on the front side, but the rear
surround side produces a dynamic sound expansion. This
program is the most suitable for sports programs.
This program is designed specifically to enhance mono
source programs. Compared to a strictly mono setting, the
sound image created in this mode is wider and slightly
forward of the speaker pair, lending an immediacy to the
overall sound. It is particularly effective when used with old
mono movies, news broadcasts and dialog.
PROGRAM
TV SPORTS
MONO MOVIE
No.
6
7