ZyXEL Communications 5 Series - Manual (Page 477)

ZyWALL 5/35/70 Series User’s Guide
Chapter 27 UPnP 477
27.3 Displaying UPnP Port Mapping
Click ADVANCED > UPnP > Ports to display the UPnP Ports screen. Use this screen to
view the NAT port mapping rules that UPnP creates on the ZyWALL. Not all fields are
available on all models.
Figure 263 ADVANCED > UPnP > Ports
Allow users to make
configuration
changes through
UPnP Select this check box to allow UPnP-enabled applications to automatically
configure the ZyWALL so that they can communicate through the ZyWALL,
for example by using NAT traversal, UPnP applications automatically reserve
a NAT forwarding port in order to communicate with another UPnP enabled
device; this eliminates the need to manually configure port forwarding for the
UPnP enabled application.
Allow UPnP to pass
through Firewall Select this check box to allow traffic from UPnP-enabled applications to
bypass the firewall.
Clear this check box to have the firewall block all UPnP application packets
(for example, MSN packets).
Outgoing WAN
Interface Select through which WAN port you want to send out traffic from UPnP-
enabled applications. If the WAN port you select loses its connection, the
ZyWALL attempts to use the other WAN port. If the other WAN port also
does not work, the ZyWALL drops outgoing packets from UPnP-enabled
applications.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.
Table 151 ADVANCED > UPnP
LABEL DESCRIPTION