ZyXEL Communications 5 Series - Manual (Page 700)

ZyWALL 5/35/70 Series User’s Guide
700 Chapter 51 Call Scheduling
Figure 441 Schedule Set Setup
If a connection has been already established, your ZyWALL will not drop it. Once the
connection is dropped manually or it times out, then that remote node can't be triggered up
until the end of the Duration.
Menu 26.1 - Schedule Set Setup
Active= Yes
How Often= Once
Start Date(yyyy-mm-dd) = N/A
Once:
Date(yyyy-mm-dd)= 2000 - 01 - 01
Weekdays:
Sunday= N/A
Monday= N/A
Tuesday= N/A
Wednesday= N/A
Thursday= N/A
Friday= N/A
Saturday= N/A
Start Time (hh:mm)= 00 : 00
Duration (hh:mm)= 00 : 00
Action= Forced On
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle
Table 258 Schedule Set Setup
FIELD DESCRIPTION
Active Press [SPACE BAR] to select Yes or No. Choose Yes and press [ENTER] to activate
the schedule set.
How Often Should this schedule set recur weekly or be used just once only? Press [SPACE BAR]
and then [ENTER] to select Once or Weekly. Both these options are mutually exclusive.
If Once is selected, then all weekday settings are N/A. When Once is selected, the
schedule rule deletes automatically after the scheduled time elapses.
Start Date Enter the start date when you wish the set to take effect in year -month-date format.
Valid dates are from the present to 2036-February-5.
Once:
Date If you selected Once in the How Often field above, then enter the date the set should
activate here in year-month-date format.
Weekdays:
Day If you selected Weekly in the How Often field above, then select the day(s) when the
set should activate (and recur) by going to that day(s) and pressing [SPACE BAR] to
select Yes, then press [ENTER].
Start Time Enter the start time when you wish the schedule set to take effect in hour-minute format.
Duration The duration determines how long the ZyWALL is to apply the action configured in the
Action field. Enter the maximum length of time in hour-minute format.