ZyXEL Communications 5 Series - Manual (Page 545)

ZyWALL 5/35/70 Series User’s Guide
Chapter 31 Maintenance 545
31.11.2 Restore Configuration
Load a configuration file from your computer to your ZyWALL.
Note: Do not turn off the ZyWALL while configuration file upload is in progress.
After you see a “restore configuration successful” screen, you must then wait one minute
before logging into the ZyWALL again.
Figure 299 Configuration Upload Successful
The ZyWALL automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
Figure 300 Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default device IP address (192.168.1.1). See
your Quick Start Guide for details on how to set up your computer’s IP address.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Configuration screen.
Table 196 Restore Configuration
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click Browse ... to find it.
Browse... Click Browse... to find the file you want to upload. Remember that you must decompress
compressed (.ZIP) files before you can upload them.
Upload Click Upload to begin the upload process.