Zebra Technologies Z6M - Manual (Page 13)

Zebra Z4M/Z6M Printers User’s Guide 5
A’‹OÃAϋ›€ÍψlН-Г‹›ПlГ
This chapter of the user’s guide is so important that we’ve printed it on a different
color paper! That way, it will be easy for you to find when you must calibrate (set up)
the printer for your particular application.
3XUSRVH
• To calibrate the printer.
• To verify that the printer is properly set up by printing a test label.
NOTE: This procedure must be performed when the printer is first installed or
if it cannot properly detect the top of the label.
To calibrate the printer, you must perform the following procedures:
• Determine the type of media (labels) being used.
• Choose the print method.
• Position the media sensor (if necessary).
• Configure the printer and software or driver based on the label being used.
• Print a test label.