ZyXEL Communications NPS-520 - Manual (Page 23)

Chapter 2 ZyXEL Utility
NPS-520 User’s Guide
23
2.5 The General Setting Screen
Use this screen to specify whether you want to open the utility when you start the computer or
minimize the utility screen.
Figure 6 ZyXEL Utility: General Setting
Refresh Use this button to scan for the available print server(s) in your network again
and update the table above.
Auto Connect Use this button to have the NPS-520 automatically associate your computer
with the specified printer when you send out a job and the printer is available.
When you click this button, a screen displays. Select a printer which is added to
your computer and connected to the NPS-520, and click OK.
Note: When your print job is done and there is no other request
(from your computer) sent to the printer in 20 seconds, the
NPS-520 drops the connection between your computer
and the printer.
Table 4 ZyXEL Utility: Status (continued)
LABEL DESCRIPTION