ZyXEL Communications NPS-520 - Manual (Page 73)

Appendix B Setting up Your Computer’s IP Address
NPS-520 User’s Guide
73
Figure 57 Macintosh OS X: Network
4 For statically assigned settings, do the following:
• From the Configure box, select Manually.
• Type your IP address in the IP Address box.
• Type your subnet mask in the Subnet mask box.
• Type the IP address of your gateway in the Router address box if you have one.
5 Click Apply Now and close the window.
6 Restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the Network window.