Technical data, Environment concerns – Zanussi 156985811-00-082009 User Manual

Page 13

Advertising
background image

The cleaning results are not satisfactory

The dishes are not clean

• The selected washing programme is not applicable for the type of load and

soil.

• The baskets are loaded incorrectly so that water cannot reach all surfaces.
• Spray arms do not turn freely because of incorrect arrangement of the load.
• The filters are dirty or not correctly installed.
• The quantity of detergent is too little or missing.

Limescales particles on the dishes • The salt container is empty.

• The water softener is adjusted on a wrong level.
• The salt container cap is not closed correctly.

The dishes are wet and dull

• No rinse aid has been used.
• The rinse aid dispenser is empty.

There are streaks, milky spots or

a bluish coating on glasses and

dishes

• Decrease the rinse aid dosage.

Dry water drop signs on glasses

and dishes

• Increase rinse aid dosage.
• The detergent can be the cause.

Technical data

Dimensions

Width cm

60

Height cm

85

Depth cm

61

Electrical connection - Voltage -

Overall power - Fuse

Information on the electrical connection is given on the rating plate on the

inner edge of the dishwasher door.

Water supply pressure

Minimum

0,5 bar (0,05 MPa)

Maximum

8 bar (0,8 MPa)

Capacity

Place settings

12

Environment concerns

The symbol on the product or on its packaging

indicates that this product may not be treated as

household waste. Instead it should be taken to the

appropriate collection point for the recycling of electrical

and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by inappropriate

waste handling of this product. For more detailed

information about recycling of this product, please

contact your local council, your household waste disposal

service or the shop where you purchased the product.
The packaging materials are environmentally friendly and

can be recycled. The plastic components are identified by

markings, e.g. >PE<, >PS<, etc. Discard the packaging

materials in the applicable container at the community

waste disposal facilities.

13

Advertising