Electrical connection – Zanussi 156985811-00-082009 User Manual

Page 15

Advertising
background image

3

4

The internal diameter must not be smaller than the diam-

eter of the hose.

If you connect the water drain hose to a trap spigot under

the sink, remove the plastic membrane (A). If you do not

remove the membrane, remaining food can cause a block-

age in the drain hose spigot.

Caution! Make sure that the water couplings are

tight to prevent water leakage.

Electrical connection

Warning! The manufacturer is not responsible if

you do not follow these safety precautions.

Ground the appliance according to safety precautions.

Make sure that the rated voltage and type of power on the

rating plate agree with the voltage and the power of the

local power supply.

Always use a correctly installed shockproof socket.

Do not use multi-way plugs, connectors and extension

cables. There is a risk of fire.

Do not replace the mains cable yourself. Contact the

Service Force Centre.

Make sure that the mains plug is accessible after

installation.

Do not pull the mains cable to disconnect the appliance.

Always pull the mains plug.

Warning! The appliance is supplied with a 13 amp

plug attached. Use a 13 amp ASTA approved (BS

1362) fuse if it is necessary to change the fuse in the plug

supplied.

15

Advertising