Zebra Technologies P310 - Manual (Page 19)

PRINTING A TEST
CARD
With ribbon and cards loaded, your P310
printer is ready to print. To check the operation
of the printer you should print a test card.
980261-001 Rev.C
11
1
2
. Place the printer’s power switch in the
OFF (0) position..
. While pressing the panel button, switch
printer on. Green indicator will show.
3. Keep pressing panel button until green
indicator starts flashing.
4. Release panel button and a test card will
print after a few seconds.
This is an example of the test card.
PLASTIC CARD PRINTER
PRINTER: P310CEM
Serial Number 23666
Firmware: 4.00
300 dpi
TEST CARD
23666
Head resistance: 1234
Offset: X12 - Y12
EC: 12
Printing Counter: 123456
800-658-8788 www.abcoffice.com
abcoffice