Zebra Technologies P310 - Manual (Page 26)

CLEANING SYSTEM Your P310 Printer includes a simple cleaning
system using the Pre-saturated Cleaning Cards
provided. The regular use of these cards will
clean and maintain important parts of your
printer: including the Print Head, Transport
Rollers, and Magnetic Encoder Station.
Although the amber and red indicators will keep
flashing until the cleaning process has been per-
formed, the printer will continue to operate.
18
980261-001 Rev.C
WHEN TO CLEAN
When the amber & red indicators flash
(Every 1000 cards* approx.)
*Using 5-panel color ribbon (YMCKO).
*Optional factory setting.
HOW TO CLEAN
1.
2.
3.
Leave power on.
Open Cover and release Print Head Bracket
to remove ribbon.
Close Print Head.
Close Cover. Remove cards from Card Cartridge.
Insert one Pre-saturated Cleaning Card
(provided) through slot on the side of the
Card Cartridge.
Press the Panel Button for a few seconds.
The Card will feed into printer and carry out
the cleaning process.Repeat the process with
a new Cleaning Card if necessary.
Note: For cleaning prior to the WHEN TO CLEAN signal, press the Panel
Button for 3 seconds to start the cleaning process.
800-658-8788 www.abcoffice.com
abcoffice