Yamaha PORTATONE PSR-OR700 - Manual (Page 101)

Memorizing the Scale Setting — Scale Memory
PSR-OR700 Owner’s Manual 101
Using Oriental Scales
Memorizing the Scale Setting
— Scale Memory
The scale settings you set (using the [SCALE SETTING] buttons or in the SCALE
TUNE display) are memorized by the Scale Memory function. Up to six scale set-
tings can be stored for instant recall, whenever you need them.
1
Set up the scale settings as desired using the [SCALE SETTING] but-
tons or in the SCALE TUNE display.
2
While holding the [MEMORY] button, press one of the SCALE MEM-
ORY [1]–[6] buttons.
The corresponding SCALE MEMORY button will light. Any data that was
previously in the selected location is erased and replaced by the new set-
tings.
Saving Your Scale Settings
The scale settings memorized to the SCALE MEMORY [1]–[6] buttons are saved as
a single file.
1
Press the [E] button to call up the SCALE TUNE BANK Selection Dis-
play.
The memorized scale settings
here will be lost when the power
is turned off, unless you perform
the Save operation (see next sec-
tion).
Press the [DIRECT ACCESS] but-
ton and [EXIT] button to call up
the MAIN display.
About the lamp status:
Off ...... no data registered,or not
currently selected
On ...... data registered, and cur-
rently selected
BANK 01
BANK 02
BANK 03
BANK 04
All settings memorized to the buttons [1]–[6]
are referred to as a “bank.” The banks can be
saved to “USER” or “USB” as Scale Tune
Bank files.