Yamaha PORTATONE PSR-OR700 - Manual (Page 88)

Using, Creating and Editing
V
oices
Editing the Volume and Tonal Balance (MIXING CONSOLE)
PSR-OR700 Owner’s Manual 88
Effect Type
■ Selecting an Effect type
1–3
Same operation as in the “Basic Procedure” on page 84. In step 2,
select the EFFECT tab.
4
Press the [F] (TYPE) button to call up the Effect Type selection display.
5
Use the [1π π π π† † † † ]/[2π π π π† † † † ] buttons to select the effect BLOCK.
6
Use the [3π π π π† † † † ]/[4π π π π† † † † ] buttons to select the part to which you want
to apply the effect.
7
Use the [5π π π π† † † † ]/[6π π π π† † † † ] buttons to select the effect CATEGORY.
DSP:
Stands for Digital Signal Proces-
sor (or Processing). DSP changes
and enhances the audio signal in
the digital realm to produce a
wide range of effects.
Effect Block Effect-applicable parts Effect characteristics
REVERB All parts Reproduces the warm ambience of playing
in a concert hall or jazz club.
CHORUS All parts Produces a rich “fat” sound as if several
parts are being played simultaneously.
DSP1 STYLE PART
SONG CHANNNEL 1–16 In addition to the Reverb and Chorus types,
the instrument has special DSP effects, that
include additional effects usually used for a
specific part, such as distortion and tremolo.
DSP2
DSP3
DSP4 RIGHT 1, RIGHT 2, LEFT,
SONG CHANNEL 1-16 Any unused DSP blocks are automatically
assigned to the appropriate parts (channels)
as needed.
5 6 7 8