Yamaha RX-V495RDS - Manual (Page 26)

26
BASIC OPERATIONS
TO PLAY A SOURCE
3
Select the desired program source by using INPUT.
(Turn on the TV/monitor for video sources.)
Front panel Remote control
or
The name of the selected program source will appear on
the display.
To play a tape or an MD
Press TAPE/MD MON / EXT. DECODER
on the front panel or TAPE/MD on the
remote control transmitter so that the
“TAPE/MD MON” indicator lights up on
the display.
To use a decoder connected to the EXTERNAL
DECODER INPUT terminals
Press TAPE/MD MON / EXT. DECODER once or more on
the front panel or EXT. DEC. on the remote control
transmitter so that “EXT. DECDR” appears on the display.
When using the remote control transmitter
• Press AMP<TUNER> on the component selector.
• When controlling an audio/visual component (tape deck,
MD recorder, CD player, DVD/LD player, etc.), press the
button on the component selector, TAPE/MD, CD, DVD/
LD, etc., for the component you want to control. (See
“SETUP CODES” on page 56.)
1
Set VOLUME to the “ ” position.
Front panel
2
Turn the power on.
Front panel Remote control
or
Front panel
2
3,4
7
2 1,7 3
4 5 8
01RX-V495RDS-3 6/22/99, 12:27 PM 26