ZyXEL Communications Prestige 2000W - Manual (Page 42)

Prestige 2000W_V2 User’s Guide
42 Chapter 4 Network Settings
1 Select Net Settings in the first menu screen (use the up or down
arrow to highlight it and then press the Left key).
5. SIP Settings
6. Settings
Select Back
2 Select Network Mode.
2. IP Address
3. Subnet Mask
Select Back
3 Select PPPoE.
[1] Fixed IP
[2] DHCP
Select Back
4 Select PPPoE Name.
3. PPPoE Pwd
1. Network Mode
Select Back
5 Use the left arrow button to clear the PPPoE name. Use the up
and down arrows to select the type of characters. Enter your
PPPoE name. Use the Left key to select Ok when you are done.
PPPoE Name
pppoe_username
Ok Aa1@ Clear
6 Select PPPoE Pwd.
1. Network Mode
2. PPPoE Name
Select Back
7 Clear the PPPoE password and enter your’s. PPPoE Pwd
*************************
Ok Aa1@ Clear
4. Net Settings
1. Network Mode
[3] PPPoE
2. PPPoE Name
3. PPPoE Pwd