ZyXEL Communications Prestige 2000W - Manual (Page 97)

Prestige 2000W_V2 User’s Guide
Chapter 13 Administrator Web Configurator Screens 97
Use the following screen to set up your Prestige to connect to the SIP server.
Note: Enter either the IP address of your SIP server or the URL domain name as
given to you by your ITSP.
Figure 33 SIP Configuration
Table 19 IP Configuration
LABEL DESCRIPTION
SIP Proxy
SIP URI Type the SIP telephone number assigned to your Prestige by your ITSP
then the corresponding telephone IP address or URL, and finally a port
number with which to make a telephone connection.
Note that a URL can be used or domain name can be used instead of
an IP address. Your incoming server supplies the rest of the address.
SIP Server Address Type the IP address or domain name of the SIP server in this field. It
doesn’t matter whether the SIP server is a proxy, redirect or register
server. You can use up to 95 ASCII characters.
SIP Server Port Enter the SIP server’s listening port for SIP in this field. Leave this field
set to the default if your VoIP service provider did not give you a server
port number for SIP.