Yamaha HTR-5230 - Manual (Page 10)

6
Display
6
x indicator
“ x ” lights up when the built-in digital sound
field processor is on.
7 MEMORY indicator
This flashes for about five seconds after pressing
MEMORY. During this period, the displayed station can be
stored in the memory.
8 AUTO indicator
This lights up when the unit is in the automatic tuning
mode.
9
STEREO indicator
This lights up when an FM stereo broadcast with sufficient
signal strength is being received.
0
Signal-level indicator
This indicates the signal level of the station being received.
If multipath interference is detected, the indication
decreases.
1 2 3 4 5
6 7 8 9 0
CONTROLS AND FUNCTIONS
1
g and o indicators
“ g ” lights up when the built-in Dolby Digital
decoder is on and the signals of the selected source are
encoded with Dolby Digital. “ o ” lights up when
the built-in Dolby Pro Logic decoder is on.
2
DSP program indicators
The name of the selected DSP program lights up.
3 Multi-information display
This display shows various information: for example the
name of the selected input source and the various settings
during adjustment with the SET MENU. The current station
frequency and band (FM or AM) also appear when the tuner
is selected as the input source.
4
SLEEP indicator
This lights up while the built-in SLEEP timer is on.
5 TAPE/MD MONITOR indicator
This lights up when the tape deck or MD recorder, etc. is
selected as the input source by pressing TAPE/MD MON /
EXT. DECODER (or TAPE/MD).
0102V39601-07_EN(UCA) 2/10/0, 11:23 AM 6