Delay time and speaker output levels, Delay time – Yamaha HTR-5230 User Manual

Page 39

Advertising
background image

35

English

B

ASIC OPERA

TION

AD
V

ANCED OPERA

TION

APPENDIX

INTR

ODUCTION

PREP

ARA

TION

1.

PRO LOGIC/Normal

15 to 30

20

DOLBY DIGITAL/Normal

0 to 15

5

PRO LOGIC/ENHANCED

15 to 30

20

DOLBY DIGITAL/ENHANCED

0 to 15

5

2.

70 mm SPECTACLE

15 to 30

23

DGTL SPECTACLE

1 to 99

15

70 mm SCI-FI

15 to 30

20

DGTL SCI-FI

1 to 99

16

3.

70 mm ADVENTURE

15 to 30

20

DGTL ADVENTURE

1 to 99

15

70 mm GENERAL

15 to 30

20

DGTL GENERAL

1 to 99

15

4.

MONO MOVIE

1 to 99

49

5.

TV SPORTS

1 to 99

9

6.

DISCO

1 to 99

40

7.

ROCK CONCERT

1 to 99

16

8.

CONCERT HALL

1 to 99

44

DELAY TIME AND SPEAKER OUTPUT LEVELS

When using the digital sound field processor with the Dolby
Pro Logic decoder or Dolby Digital decoder, you can adjust
the delay time between the main sound and sound effect,
and each speaker’s output level as you wish.

Delay Time

You can adjust the time difference between the beginning of
the sound from the main speakers and the beginning of the
sound effect from the rear speakers. The larger the value,
the later the sound effect is generated. The delay time can be
individually adjusted to all DSP programs.

Notes

• Adding too much delay will cause an unnatural effect with some

sources.

• The sound is momentarily interrupted while adjusting the delay

time.

Sound Output Level of the Center,
Right Rear and Left Rear Speakers,
and Subwoofer

If desired, you can adjust the sound output level of each
speaker even if it has already been adjusted in
“ADJUSTING THE SPEAKER BALANCE” on pages 17
and 18.

Notes

• The sound output level of the center speaker cannot be adjusted

when the input signal is analog, PCM audio, or encoded with
Dolby Digital in 2-channel.

• If “CENTER SP” in the SET MENU is set to the NONE position,

the sound output level of the center speaker cannot be adjusted.
This is because the center channel sound is automatically output
from the right and left main speakers.

• Once the sound output level has been adjusted, the level will be

the same for all DSP programs.

Speaker

Control range (dB)

Preset value

Center

–20 to +10

0

Right rear

–20 to +10

0

Left rear

–20 to +10

0

Subwoofer

–20 to 0

0

Program

Control
range (ms)

Preset
value

0108V39631-37_EN(UCA)

1/20/0, 11:29 AM

35

Advertising