Zanussi ZCE ID User Manual

Page 29

Advertising
background image

LOCATION OF SPLASHBACK

/

STORAGE BOARD

Splashback and Storage Board Kits are available to purchase from your retailer.

Fix the Splashback drilling 2 holes of 6 mm in diameter in the position shown. See Fig. 1a.
Use screws and wall plugs provided in the pack.
To enable the Splashback Board to be fitted, a 2 mm gap between the screw head and wall is required. See Fig. 1b.

Fix the Storage Board drilling 2 holes of 6 mm in diameter in the position shown. See Fig. 1c.
Use screws and wall plugs provided in the pack.
To enable the Splashback Board to be fitted, a 2 mm gap between the screw head and wall is required. See Fig. 1d.

29

Fig. 1a.

Fig. 1b.

Fig. 1c.

Fig. 1d.

Please note that the
Splashback may differ in
type and shape from that
shown in the diagram

Please note that the
Storage Board may differ in
type and shape from that
shown in the diagram

Advertising