Zebra Technologies zebra card printer zebra p330 - Manual (Page 17)

980459-001 Rev. A P330i User’s Manual 5
2
Installation and Setup
General Information
This section will guide you through the installation and setup of your P330i Card Printer. This
consists of the following procedures, which should be performed in the order presented.
• Unpacking the Printer
• Installing the Print Driver Software and Setting Driver Options
• Loading a Ribbon
• Installing the Card Cleaning Cartridge
• Setting the Card Thickness Control
• Loading Cards
• Connecting the Printer to your Computer
• Connecting Power
• Printing a Test Card to verify printer operation
The procedure to be followed for Packing the Printer for Shipment is given at the end of this
section.
The printer should be placed in a location that allows easy access to all sides. The printer
should never be operated while resting on its side or upside down.