Zebra Technologies zebra card printer zebra p330 - Manual (Page 41)

980459-001 Rev. A P330i User’s Manual 29
4
C leaning
Cleaning the Printer
Clean your P330i Printer using Pre-Saturated Cleaning Cards provided. The regular use of
these cards will clean and maintain important parts of your printer that cannot be reached,
including the Print Head, Transport Rollers, and optional Magnetic Encoder Station.
When to Clean
When the LCD Panel displays the message CLEAN PRINTER.
Approximately every 1000 cards when using 5-panel color ribbon, or every 5000 cards when
using a monochrome ribbon.
Caution • PROTECT YOUR FACTORY WARRANTY!
The recommended cleaning procedures must be performed to maintain your
factory warranty. Other than the recommended cleaning procedures described in
this manual, allow only Zebra authorized technicians to service the P330i Printer.
NEVER loosen, tighten, adjust, bend, etc., any part or cable inside the printer.
NEVER use a high pressure air compressor to remove particles in the printer.