Connecting power – Zebra Technologies zebra card printer zebra p330 User Manual

Page 34

Advertising
background image

22

P330i User’s Manual

980459-001 Rev. A

Installation and Setup

Connecting Power

Connecting Power

The P330i Printer includes an internal AC power supply that accepts nominal input voltage in
the range from 110 to 230 volts at 50 to 60 Hertz. The power source must be grounded.

Depending on specific model number, your P330i Printer will include one or two power cords;
use the one that is appropriate for the AC power source connection at your location. If neither
has an appropriate connector, AC power cords may be purchased locally; make sure it is a
three-wire (grounded) cord.

1.

Place the Printer’s power switch in the OFF ( O ) position.

2.

Depending on your local AC voltage, plug the appropriate power cord into the printer’s
power connector and a grounded AC power source connection.

3.

To turn the Printer on, set the Printer’s power switch to the ON ( | ) position.

Power
Connector

Power
Switch

Caution • If the power cord appears damaged in any way, or if the power cord will not
securely plug into the Printer’s power connector or the AC power source connection,

STOP!

Use of a damaged or incorrect power cord could cause equipment damage,

result in an electrical fire, or possibly cause injury.

Advertising