ZyXEL Communications ZyXEL Dimension ES-2108 - Manual (Page 187)

ES-2108 Series User’s Guide
Chapter 30 Introducing Commands 187
Enter exit to quit from the current mode or enter logout to exit the command interpreter.
30.8 Getting Help
The system includes a help facility to provide you with the following information about the
commands:
• List of available commands under a command group.
• Detailed descriptions of the commands.
Config Commands available in this mode
allow you to configure settings that
affect the switch globally.
Type config in
enable mode.
sysname(config)#
Command modes that follow are sub-modes of the config mode and can only be accessed from within the config
mode.
Config-vlan This is a sub-mode of the config mode
and allows you to configure VLAN
settings.
Type vlan followed by
a number (between 1 to
4094). For example,
vlan 10 to configure
settings for VLAN 10.
sysname(config-vlan)#
Config-interface This is a sub-mode of the config mode
and allows you to configure port
related settings.
Type interface
port-channel
followed by a port
number. For example,
i nterface port-
channel 8 to
configure port 8 on the
switch.
sysname(config-
interface)#
Config-mvr This is a sub-mode of the config mode
and allows you to configure multicast
VLAN settings.
To enter MVR mode,
enter mvr followed by
a VLAN ID (between 1
and 4094). For
example, enter mvr 2
to configure multicast
settings on VLAN 2.
sysname(config-mvr)#
Table 71 Command Interpreter Mode Summary (continued)
MODE . DESCRIPTION
HOW TO LOGIN/
ACCESS
PROMPT