ZyXEL Communications ZyXEL Dimension ES-2108 User Manual
Page 230
ES-2108 Series User’s Guide
230
Chapter 32 Configuration Mode Commands
where
An example is shown next.
• Specify RADIUS server 1 with IP address 10.10.10.1, port 1890 and the string secretKey
as the password. See
for more information on RADIUS server
commands.
• Specify the timeout period of 30 seconds that the switch will wait for a response from the
RADIUS server.
• Enable port authentication on ports 4 to 8.
• Activate reauthentication on the ports.
• Specify 1800 seconds as the interval for client reauthentication.
port-access-authenticator
=
Enables port authentication on the switch.
port-access-authenticator
<port-list>
=
Specifies which ports require authentication.
reauthenticate
=
Enables reauthentication on the port.
reauth-period <reauth-
period>
=
Specifies how often a client has to re-enter his or her
username and password to stay connected to the port.
sysname(config)# radius-server host 1 10.10.10.1 acct-port 1890 key
secretKey
sysname(config)# radius-server timeout 30
sysname(config)# port-access-authenticator
sysname(config)# port-access-authenticator 4-8
sysname(config)# port-access-authenticator 4-8 reauthenticate
sysname(config)# port-access-authenticator 8 reauth-period 1800