ZyXEL Communications ZyXEL Dimension ES-2108 - Manual (Page 235)

ES-2108 Series User’s Guide
Chapter 33 Interface Commands 235
• Enable port-based VLAN tagging on the switch.
• Enable ports one, three, four and five for configuration.
• Set the outgoing traffic ports as the CPU (0), seven (7) and eight (8).
33.2.8 qos priority
Syntax:
qos priority <0 .. 7>
where
An example is shown next.
• Enable ports one, three, four and five for configuration.
• Set the IEEE 802.1p quality of service priority as four (4).
33.2.9 name
Syntax:
name <port-name-string>
where
An example is shown next.
• Enable ports one for configuration.
• Sets a name for the port.
sysname(config)# vlan-type port-based
sysname(config)# interface port-channel 1,3-5
sysname(config-interface)# egress set 0,7,9
<0 .. 7> = Sets the quality of service priority for a port.
sysname(config)# interface port-channel 1,3-5
sysname(config-interface)# qos priority 4
<port-name-string> = Sets a name for your port interface(s).
sysname(config)# interface port-channel 1
sysname(config-interface)# name Test