Grease filter, Oven shelves and shelf supports – Zanussi ZCE 700 User Manual

Page 19

Advertising
background image

19

Grease Filter

To prevent a build-up of fats on the fan impellor, the grease

filter must be fitted by clipping it over the vents in the

back panel.

To clean the grease filter

When the oven has cooled down, remove the filter by

pushing the protruding tongue on the filter upward, and

wash carefully.
The grease filter should be cleaned after every use. The

filter may be washed in a dishwasher on a 65°C wash. If

the filter is heavily soiled, place the filter in a saucepan

of water with approximately 1 teaspoon of automatic

washing powder or dishwasher powder. Bring to the boil

and leave to soak for approximately 30 minutes or longer

depending on the degree of soiling. Ensure the solution

does not boil over as it could mark your hob.
Rinse filter in clear water and dry.
Remember to refit the filter before using the oven

again.

Oven Shelves and Shelf

Supports

To clean the oven shelves and the shelf supports, soak

in warm soapy water and remove stubborn marks with a

well wetted soap impregnated pad. Rinse well and dry

with a soft cloth.

The shelf supports can be removed for easy cleaning

(see diagram). Please, ensure the retaining nuts are

secure when refitting the shelf support.

When cleaning the shelf supports, take care not

to remove the lubricating grease behind the

telescopic runners. This is meant to ensure their

good operation.

FO 0018

Advertising