Zanussi ZCE 700 - Manual (Page 7)

7
The display will show:
Connection of child safety
device on zones
l
Turn the 2 single zone-control buttons anticlockwise
to “S” at the same time.
FO 2526
beide gleichzeitig auf „S”
0
A
0
A
S 0
A
S
FO 2528
When you turn on a zone the display will show:
FO 2530
You can disconnect the child safety device as follows:
l
Turn all the cooking zone control buttons to 0.
l
Turn the 2 single zone-control buttons anticlockwise
to “S” at the same time.
The light under the “key” symbol in the display will
disappear. The zones can now be used.
CHEC control: Autostop
If you forget to turn a cooking zone off after use, it will be
disconnected automatically after a specific period of time.
The higher the setting, the shorter the time before the
zone is disconnected.
Setting AUTOSTOP
1 6 hours
2 6 hours
3 5 hours
4 5 hours
5 4 hours
6 1½ hours
7 1½ hours
8 1½ hours
9 1½ hours
When the autostop function is activated the display will
show:
The zones cannot be used.
To activate the cooking zones:
l
Turn all the control buttons to 0. The zones can now
be used.
FO 2530
FO 2527
Residual heat indicator
When you switch off a zone, an “H” in the display indicates
that the zone is still hot. The residual heat indicator will
continue to be illuminated until the zone reaches a
temperature of approx. 50°C.
Automax
AUTOMAX supplies the zone with full heat for a specific
period, and then adjusts down to the setting you have
chosen.
l
Turn the control button clockwise to “A”, then select
the required setting.
The display alternates between A and the setting chosen.
The period for which AUTOMAX is connected depends
on the setting chosen.