Yamaha DRCX - Manual (Page 43)

37
CHAPTER2 Ethernet Unit
2-14-3 UTP (STP) cable
The Ethernet cables are standardized by ANSI/TIA/EIA568A. To avoid miswiring and
malfunction, we recommend using cables conforming to this standard. When using
10BASE-T cables, it must have transmission characteristics of category 3 or higher.
■ Straight-through cable
Use this cable to connect the HUB to the controller and other party’s device.
■ Crossover cable
Use this cable to connect the controller directly with other party’s device. This cable is
also used to connect HUBs in cascade(when HUBs have a cascade port).
Signal name
TD+
TD-
RD+
Not use
Not use
RD-
Not use
Not use
Signal name
TD+
TD-
RD+
not use
not use
RD-
Not use
Not use
Pin No
1
2
3
4
5
6
7
8
Pin No
1
2
3
4
5
6
7
8
Color
Green/White
Green
Orange/White
Blue
Blue/White
Orange
Brown/White
Brown
Color
Green/White
Green
Orange/White
Blue
Blue/White
Orange
Brown/White
Brown
* Pins 4, 5, 7, 8 are not used for 10BASE-T.
* Straight-through cable also connects between T-568B and T-568B.
Between T-568A Between T-568A
Signal name
TD+
TD-
RD+
Not use
Not use
RD-
Not use
Not use
Signal name
TD+
TD-
RD+
not use
not use
RD-
Not use
Not use
Pin No
1
2
3
4
5
6
7
8
Pin No
1
2
3
4
5
6
7
8
Color
Green/White
Green
Orange/White
Blue
Blue/White
Orange
Brown/White
Brown
Color
Orange/White
Orange
Green/White
Blue
Blue/White
Green
Brown/White
Brown
* Pins 4, 5, 7, 8 are not used for 10BASE-T.
Between T-568A Between T-568B