Yamaha HTR-5990 - Manual (Page 37)

33
AUTO SETUP
PREP
ARA
TION
• If you change speakers, speaker positions, or the layout of
your listening environment, run AUTO SETUP again to
re-calibrate your system.
• In the DISTANCE results, the distance displayed may be
longer than the actual distance depending on the
characteristics of your subwoofer.
• In the EQ results, different values may be set for the same
band to provide finer adjustments.
8
Press ENTER to return to the RESULT:EXIT
screen.
9
Make sure that the pointer is pointing at SET
and CANCEL and then press l / h to select
SET or CANCEL.
• Select SET to confirm the AUTO SETUP results.
• Select CANCEL to cancel the AUTO SETUP
results.
10
Press ENTER to confirm your selection.
The SET MENU screen appears in the OSD.
■ If you selected RELOAD in step 5
The RESULT:EXIT display appears.
7
Make sure that the pointer is pointing at SET
and CANCEL and then press l / h to select
SET or CANCEL.
• Select SET to confirm the AUTO SETUP results.
• Select CANCEL to cancel the AUTO SETUP
results.
8
Press ENTER to confirm your selection.
The SET MENU screen appears in the OSD.
Notes
RESULT:EXIT
WARNING
RESULT
. SP:5/4/0.1
. DIST:4.5/6.1m
. LVL:-10.0/+6.5dB
. >SET CANCEL
[ ]/[ ]:Up/Down
[ENTER]:Enter
p
p
SET MENU
. ;AUTO SETUP
;MANUAL SETUP
. ;INFORMATION
[ ]/[ ]:Up/Down
[ENTER]:Enter
p
p
RESULT:EXIT
WARNING
RESULT
. SP:5/4/0.1
. DIST:4.5/6.1m
. LVL:-10.0/+6.5dB
. >SET CANCEL
[ ]/[ ]:Up/Down
[ENTER]:Enter
p
p
SET MENU
. ;AUTO SETUP
;MANUAL SETUP
. ;INFORMATION
[ ]/[ ]:Up/Down
[ENTER]:Enter
p
p