Yamaha HTR-5990 - Manual (Page 89)

85
MANUAL SETUP
AD
V
A
N
C
ED
OPERA
T
ION
■ Parameter initialization
E)PARAM. INI
Use this feature to initialize the parameters for each sound
field program within a sound field program group. When
you initialize a sound field program group, all of the
parameter values within that group revert to their initial
settings.
Press the corresponding numeric button for the sound
field
program that you want to initialize.
An asterisk (*) next to a program name means that the
parameter values have been changed from their initial
settings.
• You cannot automatically revert to the previous parameter
settings once you initialize a sound field program group.
• You cannot separately initialize individual sound field
programs.
• You cannot initialize any program groups when MEMORY
GUARD is set to ON.
■ Zone set
F)ZONE SET
Speakers B SP B
Use to specify the location of speakers connected the
SPEAKERS B terminals.
Choices: MAIN, ZONE B
• Select MAIN to turn on/off SPEAKERS A and B when
the speakers connected to the SPEAKERS B terminals
are set in the main room.
• Select ZONE B if the speakers connected to the
SPEAKERS B terminals are set in another room. If
SPEAKERS A is turned OFF and SPEAKERS B is
turned ON, all the speakers including the subwoofer in
the main room are muted and the unit outputs sound
from SPEAKERS B only.
• If you select ZONE B and connect headphones to the PHONES
jack on the unit, the sound is output from both headphones and
SPEAKERS B.
• When a DSP program is selected, the unit automatically enters
the Virtual CINEMA DSP mode.
Zone 2 volume ZONE2 VOL
Use to select how the volume control will operate with
regard to the ZONE 2 OUTPUT jacks.
Choices: VAR, FIX
• Select VAR to adjust the ZONE 2 OUTPUT volume
simultaneously with VOLUME +/– on the remote
control.
• Select FIX to fix the ZONE 2 OUTPUT volume level
to a standard line level.
Zone 3 volume ZONE3 VOL
Use to select how the volume control will operate with
regard to the ZONE 3 OUTPUT jacks.
Choices: VAR, FIX
• Select VAR to adjust the ZONE 3 OUTPUT volume
simultaneously with VOLUME +/– on the remote
control.
• Select FIX to fix the ZONE 3 OUTPUT volume level
to a standard line level.
Zone 2 amplifier ZONE2 AMP
Use to select how the ZONE 2 speakers are amplified.
Choices: EXT, SUR, PRNS, BOTH
• Select EXT if you want to connect your Zone 2
speakers through an external amplifier connected to the
ZONE 2 OUTPUT jacks on the rear panel of this unit.
• Select SUR to use the internal surround amplifier of
this unit if you want to connect your Zone 2 speakers
directly to the PRESENCE/ZONE 2(3) speaker
terminals on the rear panel of this unit.
• Select PRNS to use the internal surround back
amplifier of this unit if you want to connect your Zone
2 speakers directly to the PRESENCE/ZONE 2(3)
speaker terminals on the rear panel of this unit.
• Select BOTH to use the internal surround and surround
back amplifiers of this unit if you want to connect your
Zone 2 speakers directly to both the PRESENCE/
ZONE 2(3) and the SURROUND/ZONE 2(3) speaker
terminals on the rear panel of this unit.
• If BI-AMP is set to ON in the ADVANCED SETUP menu,
SUR, PRNS and BOTH cannot be selected.
• Zone 2 and Zone 3 cannot use the same amplifier at the same
time. If BOTH is selected for ZONE2 AMP, for instance, only
EXT can be selected for ZONE3 AMP and vice versa.
• The Intelligent Power AMP Assign feature of this unit becomes
in effect in the following cases so that the surround and
surround back amplifiers of this unit are automatically assigned
to the main room for the use of the surround back speakers
connected to the SURROUND BACK speaker terminals in the
7.1-channel system.
– When ZONE2 AMP and ZONE3 AMP are set to PRNS and
EXT respectively and Zone 2 is turned off
– When ZONE2 AMP and ZONE3 AMP are set to EXT and
PRNS respectively and Zone 3 is turned off
• If either ZONE2 AMP or ZONE3 AMP is set to SUR or PRNS,
the speaker system of the main room is limited to 3.1 or
2.1-channel playback no matter when Zone 2 or Zone 3 is
turned off because the SURROUND/ZONE 2(3) speaker
terminals are used for the zone connection.
Notes
Notes
STEREO
MUSIC
ENTERTAINMENT
MOVIE THEATER
*SURROUND
PRESS DSP KEY
E)PARAM. INI
SP B ;;;;;;;;MAIN
ZONE2 VOL ;;;;VAR
ZONE3 VOL ;;;;VAR
ZONE2 AMP ;;;;EXT
F)ZONE SET
[ ]/[ ]:Up/Down
[<]/[>]:Adjust
p
p
Notes