Dx voice selection – Yamaha PLG100-DX User Manual
Page 20
20
5.
Use the [VALUE
/
] buttons to select the voice you wish to use.
DX Voice Selection
• When a program number that does not exist for the PLG100-DX is selected when the chosen bank is
from 000 to 099, the icon for the voice selected in the XG tone generator itself will be displayed in the
icon area.
■
Specifying Parts/Performance Layers ....................................................................
1.
Press the [UTIL] button on the panel, and display the utility mode.
2.
Press the [SELECT
] button several times to move the cursor to “PLUGIN”, then
press [ENTER].
3.
Press the [SELECT
/
] buttons as needed to move the cursor to “PLG100-DX,”
then press the [ENTER] button. An editing screen for the system parameters expanded
by the PLG100-DX will be displayed.
4.
Press the [SELECT
/
] buttons several times to display “PartAssign,” then press
the [VALUE
/
] buttons to select the part or layer you want to assign to the
PLG100-DX.
When the Sound Modulation Mode is XG, use 01 to 16, or off.
When the Sound Modulation Mode is PERFORM, use 01 to 04, or off.
• SW1000XG does not support the performance mode.
Program number display location