Plg100-dx system parameters – Yamaha PLG100-DX User Manual
Page 26
26
The parameters that apply to the entire system of the PLG100-DX are added to the utilities of the
main XG tone generator.
PLG100-DX System Parameters
1.
Press the [UTIL] button.
The menu screen for the Utility Mode will be displayed.
2.
Pressing the [SELECT
] button and move the cursor to “PLUGIN,” then press the
[ENTER] button. The plug-in board select screen will be displayed.
3.
Press the [SELECT
/
] buttons and move the cursor to the plug-in board to be
edited, then press the [ENTER] button (select PLG100-DX here).
The parameter screen for the selected plug-in board will be displayed.
4.
Pressing the [SELECT
/
] buttons, move the cursor to the parameter which is to
be set. Change the value for the parameter using the [VALUE
/
] buttons.
5.
Press the [EXIT] button several times to return to the initial screen.