ZyXEL Communications Prestige 480 User Manual
Page 219
Prestige 480 Dual BRI ISDN Router
IP Policy Routing
15-5
Figure 15-1 Menu 25.1.1 - IP Routing Policy
Table 15-1 IP Routing Policy Menu Fields
Field
Description
Policy Set Name
This is the name of the policy set assigned in Menu 25 - IP Routing Policy
Setup.
Active
Press the spacebar to select Yes to activate the policy.
Criteria
IP Protocol
IP layer 4 protocol, e.g., UDP, TCP, ICMP, etc.
Type of Service
Prioritize incoming network traffic by choosing from Don’t Care/ Normal / Min
Delay / Max Thruput / Max Reliability.
Packet Length
Enter the length of incoming packets (in bytes). The operators in the [Len
Comp] (next) apply to packets of this length.
Len Comp
Press the spacebar to choose from Equal / Not Equal / Less / Greater / Less
or Equal / Greater or Equal.
Precedence
Precedence value of the incoming packet. Values range from 0 to 7 or Don’t
Care.
Source:
addr start= /
end=
Source IP address range from start to end.
port start= /
end=
Source port number range from start to end; applicable only for TCP/UDP.
Menu 25.1.1 - IP Routing Policy
Policy Set Name= test
Active= Yes
Criteria:
IP Protocol = 6
Type of Service= Normal
Packet length= 40
Precedence = 0
Len Comp=
Source:
addr start= 1.1.1.1
end= 1.1.1.1
port start= 20
end= 20
Destination:
addr start= 2.2.2.2
end= 2.2.2.2
port start= 20
end= 20
Action= Matched
Gateway Type = Gateway node
Gateway addr = 1.2.3.4
Type of Service= No Change
Gateway node = 2
Precedence = No Change
Log= No
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.