9 configuring mega bundle, 2 isp remote node and supplementary remote node – ZyXEL Communications Prestige 480 User Manual
Page 82
Prestige 480 Dual BRI ISDN Router
3-18
Internet Access
3.8.2 ISP Remote Node and Supplementary Remote Node
The previous ZyNOS versions supported only one ISP account. That remote node is called as the “ISP
remote node”. Now in ZyNOS v2.42, you can setup other ISP accounts and this is called as
“supplementary remote node”.
You can have several “Supplementary remote node”, but only one “ISP remote node”. These remote
nodes can work at the same time. “Supplementary remote” is almost the same as “ISP remote node”
except that “supplementary remote node” will not appear in the routing table as default route.
3.9 Configuring Mega Bundle
Step 1. Configure an ISP remote node.
1. Setup ISP in Menu 4.
2. Set Multilink= BOD or Multilink= Always in Menu 4
3. In Menu 11, edit the ISP remote node.
4. Set Edit PPP Options= Yes and then press [Enter]. You will enter Menu 11.2
Menu 11.2 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
BACP= Enable
Mega Bundle= None
Multiple Link Options:
BOD Calculation= Transmit or Receive
Min. Channels= 1
Max. Channels= 1