Zanussi ZYB 460 - Manual (Page 7)

Clock functions
Electronic programmer
1
4 5 6
3
2
1 Temperature / Time display
2 Heat indicator
3 Clock function indicators
4 Selection button
5 Pyrolyse function button
6 Temperature check buton
Setting the clock functions
1. Set an oven function and temperature (not necessary
for Time of day and Minute Minder).
2. Push the Selection button again and again until the
desired function indicator flashes.
3. To set the time for Minute Minder , Duration
or End , use the + / - knob. The related
function indicator comes on.
When the time period is completed, the related func-
tion indicator flashes, the display shows 0.00 and an
acoustic signal sounds.
4. To stop the signal and the flashing:
- with Minute Minder push a button
- with Duration and End turn the oven functions se-
lector to the position Off.
With Minute Minder an acoustic signal also sounds
when 90% of the time period is completed.
With the functions Duration and End the
oven switches off automatically.
Clock function Application
Time of day Shows the time. To set, change or check the time.
Minute Minder To set a countdown time. A signal sounds, after the time period is completed. This
function has no effect on the operation of the oven.
Duration To set how long the oven has to be in operation.
End To set the switch-off time for an oven function.
Duration and End can be used at the
same time, if the oven is to be switched on and off
automatically later. First set Duration , then End
.
Cancelling the clock functions
To cancel the minute minder, set the time to 0.00. To can-
cel Duration or End turn the "+/- " control knob to "0".
In case of a power cut, most of the settings are can-
celled. Reset the settings when the power supply is
restored.
Using the accessories
Warning! Refer to "Safety information" chapter.
Installing the oven accessories
Put the slide-in accessories between the guide bars of one
of the oven levels.
7