Yamaha R-V303 - Manual (Page 18)

16
1
Set to the “
∞
” position.
2
Turn the power on.
3
Set to the “0” position.
4
5
Select the center channel output mode suitable for your
speaker configuration.
(Refer to “SPEAKER CONFIGURATION” on page 7.)
On the feature of each mode, refer to the “Note” shown
below.
Note
In step 5, when you select a center channel output mode,
note the following.
For 5-speaker configuration)
NORM:
Select this mode when you use a center speaker
that is smaller than the main speakers. In this
mode, the bass tone will be output from the main
speakers.
WIDE: Select this mode when you use the center
speaker approximately same sized as the main
speakers.
For 4-speaker configuration)
PHANTOM: Select this mode when you do not use the center
speaker. The center sound will be output from
the left and right main speakers.
SPEAKER BALANCE ADJUSTMENT
This procedure lets you adjust the sound output level balance between the main, center, and rear speakers using the built-in test
tone generator. When this adjustment is made, the sound output level heard at the listening position will be the same from each
speaker. This is important for the best performance of the digital sound field processor and the Dolby Pro Logic Surround decoder.
BASS TREBLE
5 5
4
3
2
l
0
l
2
3
4
5 5
4
3
2
l
0
l
2
3
4
BALANCE
5 5
4
3
2
l
0
l
2
3
4
L R
l6
20
28
40
60
l2
8
4
2
0
–dB
VOLUME
STANDBY/ON
TEST — + DELAY TIME
PHONO
SKIP CD
DISC SKIP
— + A/B/C/D/E TUNER
DIR A
A/B
TAPE
VCR REC/PAUSE
— +
PRESET
DIR B
VIDEO
EFFECT
VOLUME
PRO LOGIC
ROCK
SUR.
HALL
3 STEREO
DSP
SLEEP POWER
1 2
STANDBY/ON
NATURAL SOUND AV RECEIVER
PHONES BASS TREBLE BALANCE
VOLUME
5 5
4
3
2 l 0 l 2
3
4
5 5
4
3
2 l 0 l 2
3
4
L R
l6 20
28
40
60
l2
8
4
2
0 –dB
5 5
4
3
2 l 0 l 2
3
4
FM/AM
MAN'L/AUTO FM
TUNING MODE
AUTO/MAN'L MONO
CENTER MODE DOWN TUNING UP EFFECT
MEMORY EDIT PROGRAM
A/B/C/D/E 1 2 3 4 5 6 7 8
TAPE/MD MONITOR VIDEO VCR
TUNER CD PHONO
REAR LEVEL CENTER LEVEL
0 l0 0 l0
3
4
TEST
ORM.WIDEPHANTOM TEST
CONTINUED
CENTER
MODE NORM
WIDE
PHANTOM
5