Yamaha R-V303 - Manual (Page 27)

25
English
1
Follow steps 1 – 5 shown in “BASIC OPERATIONS” on
page 18.
2
Select the desired program that is suitable for the
source.
On the remote control On the front panel:
transmiter:
a)
Turn on the DSP so that a
program name lights up on
the display.
b)
Select a desired program
confirming it on the display.
The selected program name is shown on the display.
3
If desired, adjust the delay time and the output level of
each speaker. (For details, refer to the corresponding
descriptions on page 26.)
Notes
● Program selection can be made to individual input sources.
Once you select a program, it is linked with the input source
selected at that time. So, when you select the input source
the next time, the same program will be automatically called.
● If you prefer to cancel the DSP, press the EFFECT button.
The sound will be the normal 2-channel stereo without
surround sound effect.
● When HALL or ROCK is selected, no sound is heard from
the center speaker.
● When a monaural sound source is played with PRO
LOGIC, no sound is heard from the rear speakers.
● When PRO LOGIC is selected, if the main-source
sound is considerably altered by overadjustment of the
BASS or TREBLE control, the relationship between the
center and rear channels may produce an unnatural effect.
Playing a source with an effect of the digital sound field processor (DSP)
PRO LOGIC
ROCK
SUR.
HALL
3 STEREO
STANDBY/ON
NATURAL SOUND AV RECEIVER
PHONES BASS TREBLE BALANCE
VOLUME
5 5 4
3
2 l 0 l 2
3
4 5 5 4
3
2 l 0 l 2
3
4 L R
l6 20
28
40
60
l2
8
4
2
0 –dB
5 5 4
3
2 l 0 l 2
3
4
FM/AM
MAN'L/AUTO FM
TUNING MODE
AUTO/MAN'L MONO
CENTER MODE DOWN TUNING UP EFFECT
MEMORY EDIT PROGRAM
A/B/C/D/E 1 2 3 4 5 6 7 8
TAPE/MD MONITOR VIDEO VCR
TUNER CD PHONO
REAR LEVEL CENTER LEVEL
0 l0 0 l0
2
2
PRO LOGIC
EFFECT
PROGRAM
PRO LOGIC
TEST — + DELAY TIME
PHONO
SKIP CD
DISC SKIP
— + A/B/C/D/E TUNER
DIR A
A/B
TAPE
VCR REC/PAUSE
— +
PRESET
DIR B
VIDEO
EFFECT
VOLUME
PRO LOGIC
ROCK
SUR.
HALL
3 STEREO
DSP
SLEEP POWER