Basic operations, When you finish using this unit, Set to the – Yamaha R-V303 User Manual
Page 20: Position, Turn the power on, Adjust to the desired output level, Man'l/auto fm, Auto/man'l mono
18
1
Set to the “
∞
” position.
2
Turn the power on.
3
Select the desired input source by using the input
selector buttons.
(For video sources, turn the TV/monitor ON.)
* The name of the selected input source will appear on
the display.
4
Play the source. (For detailed information on the tuning
operation, refer to page 20.)
5
Adjust to the desired output level.
6
If desired, adjust the BASS, TREBLE and BALANCE
controls (refer to page 19), and use the digital sound
field processor. (Refer to page 25.)
Notes on using the input selector buttons
●
Note that pressing each input selector button selects the
source which is connected to the corresponding input
terminals on the rear panel.
●
The selection of TAPE/MD MONITOR cannot be canceled
by pressing another input selector button. To cancel it,
press TAPE/MD MONITOR again so that the “TAPE
MONITOR” indicator disappears from the display.
When you select a button other than TAPE/MD
MONITOR, make sure that the “TAPE MONITOR”
indicator is not illuminated on the display.
●
If you select the input selector button for a video source
without canceling the selection of TAPE/MD MONITOR,
the playback result will be the video image from the video
source and the sound from the audio tape (or MD etc.).
●
Once you play a video source, its video image will not be
interrupted even if the input selector button for an audio
source is selected.
When you finish using this unit
Press the STANDBY/ON switch on the front panel again or
the POWER /I key on the remote control transmitter to turn
this unit into the standby mode.
BASIC OPERATIONS
TO PLAY A SOURCE
l6
20
28
40
60
l2
8
4
2
0
–dB
VOLUME
l6
20
28
40
60
l2
8
4
2
0
–dB
VOLUME
TUNER
CD
PHONO
STANDBY/ON
1, 5
2
6
STANDBY/ON
NATURAL SOUND AV RECEIVER
PHONES
BASS
TREBLE BALANCE
VOLUME
5
5
4
3
2
l
0
l
2
3
4
5
5
4
3
2
l
0
l
2
3
4
L
R
l6
20
28
40
60
l2
8
4
2
0
–dB
5
5
4
3
2
l
0
l
2
3
4
FM/AM
MAN'L/AUTO FM
TUNING
MODE
AUTO/MAN'L MONO
CENTER
MODE
DOWN TUNING UP
EFFECT
MEMORY
EDIT
PROGRAM
A/B/C/D/E
1
2
3
4
5
6
7
8
TAPE/MD
MONITOR
VIDEO
VCR
TUNER
CD
PHONO
REAR
LEVEL
CENTER
LEVEL
0
l0
0
l0
3
From page 18 to 26, this manual describes how to operate this unit mainly by using the front panel control parts.
To operate this unit on the remote control transmitter, use the corresponding keys on the remote control transmitter.
6