X10 Wireless Technology MK19A - Manual (Page 22)

43 42
2. Press and hold
SETUP until the LED
indicator lights
steadily. Release
the Setup button.
3. Use the number
buttons to enter
the number
equivalent to the
chosen House
Code (1=A, 2=B
..16=P).
4. Press the ENTER
button to confirm
the House Code.
The LED turns off.
C
HANGING THE
X-10 H
OUSE
C
ODE
The Mouse Remote defaults to House
Code A, and in most cases you will not
need to change this unless you are
experiencing interference from a
neighboring X-10 system.
1. Press and release
the X-10 button.
Note: The Housecode you choose must
match the Housecode on the Transceiver
Module you are using it with.
2. Press and hold
TIMER until the LED
indicator lights
steadily. Release
the TIMER button.
3. Use the number
buttons to enter
the module Unit
Code for the
module to be
turned off.
4. Press the desired
function button (e.g.
CH - to turn the
module off, or CH+
to turn it on, after
the preset time).
5. Using the number
buttons enter the
sleep time desired
(1 to 99 mins).
6. Press ENTER to
confirm the setting.
1. Press and release
the X-10 button.
T
O SET THE
X-10 S
LEEP
T
IMER
The X-10 Sleep Timer switches off the
chosen modules after the preset time.