X10 Wireless Technology MK19A - Manual (Page 24)

47 46
T
ROUBLESHOOTING
The Transceiver Module doesn’t
respond to the remote:
• Check the House Code of the
Transceiver Module is set to A. If you
have changed the Housecode on the
remote (see p. 43), check that it
matches the Housecode on the
module.
• Press the ON/OFF button on the
front of the Transceiver Module to
confirm it operates the equipment
connected to it.
The Transceiver Module works, but
other modules don’t respond:
• Check that the module has the same
Housecode as the Transceiver
Module.
• Try plugging the Module into a
different outlet.
The Mouse Remote won’t control your
A/V equipment, or doesn’t work at all:
• Use manual controls or the original
remote control to confirm the
equipment is working properly.
• Be sure you pressed the device key
for the device you want to control.
• Re-enter the code for your A/V
product from the code listings on
pages 23 through 32.
• Try searching for the code as
described on page 34.
• Replace the Mouse Remote’s
batteries.
The Remote won’t control my audio CD
player:
• The CD key on the Mouse Remote
controls the CD player in your PC. To
control an external audio CD player
set it up under the AUX key. Press
Setup, then AUX, then CD, then enter
the code from the code listings under
the heading CD Codes (page 30-
31).
Plug in a Heavy Duty Module
HD245 to control 220V appliances
such as air conditioners and water
heaters.
A
I
E M
O C
G K
•
•
• •
• •
• •
1
9
5 13
15 3
7 11
•
•
•
• •
• •
UNIT
Remote Chime
HOUSE
ON
OFF
RF Wall Switch
BRIGHT
DIM
ON
ON
2 1
1
9
5 13 A
I
E M
A B
1 2 3
INPUT
MODE
POWERFLASH INTERFACE
TEST
ALL UNITS OFF
1
9
5 13 A
I
E M
CONTINUOUS MOMENTARY
UNIVERSAL MODULE
ON
OFF
SOUNDER & RELAY
RELAY ONLY
SOUNDER ONLY
A
I E M • •
• • 1
9 5 13 • •
• •
Heavy Duty Appliance Module
UNIT HOUSE
Use a controller to trigger the
Remote Chime Module SC546 to
call Dad up for dinner, or warn
people you’re about to turn on the
sprinkler.
Fit a Wireless Wall Switch
RW724 anywhere you need an
extra switch - with no wires.
Sends commands to the
Transceiver Module just like a
remote.
Use the isolated contacts on the
Universal Module UM506 to control
pool pumps, sprinklers, drapes and
other low voltage equipment.
Includes built in warning beeper.
Switch entrance or garage lights on
from your car with the convenient
Keychain Remote KC674.
The PowerFlash Module PF284
connects to dry contact or low
voltage alarm terminals on your
burglar alarm system and flashes
X-10 controlled lights when it is
triggered.
Use the Mini Timer MT10A
to program up to 4 X-10
Modules to go on and off
up to twice a day.