Zx4300p series led reference key – Znyx Networks ZX4300P User Manual
Page 9
Installation
ZX4300P Series User's Guide
Page 6
ZX4300P Series LED Reference Key
LED
Color
Function
Power up Display
LNK (0-23)
Green
ON indicates a link is established
with the corresponding port.
OFF during power up.
ACT (0-23)
Yellow
Flashing indicates activity on the
channel.
OFF during power up.
SPD100
(0-23)
Green
ON indicates the ethernet channel
is successfully linked at 100 Mb/s
OFF during power up. OFF
linked at 10Mb/s
RESET
Pressing RESET runs a lamp test to
ensure all switch LEDs are
operating and restarts the adapter.
POWER
Green
ON indicates the power source is
active.
ON during power up.
REAR
PANEL
Green
ON indicates continuity with the
Rear Transition Board
ON during power up, if RTB
installed.
HOTSWAP
Blue
After the extraction levers are
released (pulled apart), ON
indicates the switch unit is ready to
remove.
During “hot” insertion (system is
active), HotSwap LED is ON and
turns OFF when the switch is
correctly seated.
OFF during power up.