Yamaha CDR200t - Manual (Page 18)

Chapter 3 - Operation
12
Ejecting the Disc
If the CDR200t is powered on:
Press the eject button to eject the disc.
Note: You cannot eject the disc if the SCSI command prohibits the eject
operation while the CDR200t is reading data.
Caution: Be sure to remove the disc after it is completely ejected. (Trying to
remove the disc before it is completely ejected may cause the drive to
malfunction.)
If the CDR200t is not powered on:
Pressing the eject button will not eject the disc.
ON/
DISC
VOL
READ/
WRITE
Recordable
Press the eject button
6 2 READ WRITE