Yamaha EMX68s - Manual (Page 27)

Installing an optional rack mount kit
25
EMX88S/EMX68S—Owner’s Manual
Installing an optional rack mount kit
You can rack-mount the EMX88S/EMX68S using
an optional rack mount kit (RK-88).
Rack mount kit RK-88
• Bracket
×
2
• Screw
×
6
Before you rack-mount the EMX88S/EMX68S,
make sure that sufficient ventilation will be
maintained. (Never install the unit in a sealed
rack.)
If you are going to install multiple devices includ-
ing the unit in a rack, keep a 1U space or more
between the devices. Use a blank panel with holes
for ventilation if you wish to insert a panel
between the devices.
You will need a 7U space to install the rack
mount. After installation, the unit will project
62 mm from the front surface of the rack.
Installing the rack mount bracket
1 Remove the carrying handle by loosening and
removing four screws.
2 Attach one of the rack mount brackets to the side
of the EMX88S/EMX68S using three included
screws.
3 Attach the other rack mount bracket in the same
way.
62